|
Sirocco 4000w HMI The most powerful
The Sirocco 4000w HMI lighting balloon is the most powerful of the whole range and offers the highest quality of light
SELF-INFLATING LIGHTING BALLOON
> Efficient: it offers an incomparable quality of light due to a color rendering index (CRI) of 100%. Its quick hot restrike system allows minimal downtime > Easy to set up: lights the same area as a traditionnal lighting tower using less equipment and manpower for setup
The balloon
> 220cm in diameter > Self-inflated by an internal fan > The integrated reflector offers optimal light output > The elliptical shape offers a higher wind resistance : up to 100 km/h > A stem at the base of the envelope is used to adapt the balloon on a stand or a tower
Quick and easy set up
> The balloon is connected to a 4000w magnetic ballast > The balloon inflates within 5 minutes (1 plug + 1 circuit-breaker on the ballast) > The light is controlled by a switch on the ballast > The balloon is ready to use in about 10 minutes. The total set up depends on the chosen mast
Safety and reliability
> IP53 balloon > The texture of the envelope is non flammable > The volume of the balloon keeps the envelope cold and allows to handle it without being burnt > A safety system switch turns the power off if the internal pressure is reduced
Technical data
| Electrical features |
|
| Type of lamp holder |
G38
|
| Lamp |
1x4000w
|
| Type of lamp |
HMI
|
| Power supply |
100V, 120V, 230V
|
| Power cables |
5G2.5 + 3x2
|
| Average lamp life |
500h
|
| Power supply protection |
16-25A breaker
|
| Efficiency |
95Lm/w
|
| Fire up time |
2 to 3 minutes
|
| Restrike time |
3 to 6 minutes
|
| Ignition voltage |
45 to 55 kv
|
| Required generator |
11.25 kv
|
> Click here to download PDF presentation sheet for Sirocco 4000w HMI
|